loading
  • RAXIMO

    ...customize your Bike

  • RAXIMO brake & clutch lever

    TÜV approved for thousands of models in 9 colours

  • RAXIMO Lever Guards

    TÜV approved in 9 colours and with many adapters

  • RAXIMO Handlebar

    TÜV approved in 3 types and 8 colours

  • RAXIMO Riser

    Classic from 20–50 mm, Offset and Vario Riser – TÜV approved

Video or image with text

Welcome to RAXIMO

Motorcycle Design Parts – TÜV approved!

With RAXIMO, we are realising our vision of a sensible design tuning system for motorbikes. We have had all relevant components approved by the TÜV (German Technical Inspection Authority) and provided with ABE road approval by the KBA (German Federal Motor Transport Authority).

The special thing about it is the variety with up to 9 always the same colours in which you can order these high-quality, anodised parts. This results in 6561 possible colour combinations for the BCF brake and clutch levers, for example. Each assembled part is unique and is assembled and checked at our premises near Munich according to your order and colour wishes.

RAXIMO is "Made in Germany" in design and individual assembly.

CUSTOMIZE YOUR BIKE

RAXIMO – MOTORCYCLE DESIGN PARTS

RAXIMO BCF, BCS & BCE

Brake lever & clutch lever

At the heart of RAXIMO are our TÜV approved brake and clutch levers for over 1500 motorbike models. Available in the versions "short", "foldable" and "extendable", they can be freely configured in terms of colour and are specially produced to order according to the individual colour requirements of each customer and delivered with the matching adapters.

to the levers in store

  • BCF brake lever & clutch lever – "foldable"
    BCF brake lever & clutch lever – "foldable"

    BCF brake lever & clutch lever – "foldable"

    The BCF lever is foldable, what allows the lever to fold away upwards in case of an overturn. Unintentional folding up is prevented by a mechanism during normal operation.

    The lever is adjustable in length by 35 mm by means of a dovetail joint and corresponds approximately to the original lever in its maximum length. The end parts can be reordered in a set in 9 colours after scratching.

    The levers are 6-way adjustable in traction without affecting switches.

    The anodisation of RAXIMO levers meets the highest quality standards. All screw connections comply with the DIN standard and are mounted with the prescribed torque.

  • BCS brake lever & clutch lever – "short"
    BCS brake lever & clutch lever – "short"

    BCS brake lever & clutch lever – "short"

    The levers can be adjusted 6-fold in the pull path, without affecting switches in general.

    The anodisation of RAXIMO levers meets the highest quality standards. All screw connections comply with the DIN standard and are mounted with the prescribed torque.

  • BCE brake lever & clutch lever – "extendable"
    BCE brake lever & clutch lever – "extendable"

    BCE brake lever & clutch lever – "extendable"

    The lever is adjustable in length by 35 mm by means of a dovetail joint and corresponds approximately to the original lever in its maximum length. The end parts can be reordered in a set in 9 colours after scratching.

    The levers are 6-way adjustable in pull, without affecting switches in general.

    The anodisation of RAXIMO levers meets the highest quality standards. All screw connections comply with the DIN standard and are mounted with the prescribed torque.

  • Our levers in comparison
    Our levers in comparison

    Our levers in comparison

    If a motorbike model is listed in our national type approval, you have the choice between BCF, BCS and BCE brake and clutch levers at RAXIMO.Currently, over 1500 models are listed in our 6th extension, but this is constantly being expanded.
    For all variants, 9 identical colours are always available for each component, from which the levers can be individually configured in terms of colour.

    The adjustability of the angle to the handlebar in six steps is identical for all three variants.

    A length adjustment range of 16-19 cm is available for both the BCF and the BCE levers.

    The folding function, which allows the lever to fold upwards in the event of a fall, is exclusively available with our BCF lever.

  • BCF brake lever & clutch lever
    BCF brake lever & clutch lever

    BCF brake lever & clutch lever

    The RAXIMO BCF brake and clutch levers in the colour combination: main part – titanium, middle part – titanium, end part – gold and adjuster – gold, here on a BMW R1200GS.

  • BCF brake lever & clutch lever
    BCF brake lever & clutch lever

    BCF brake lever & clutch lever

    The RAXIMO BCF brake and clutch levers in the colour combination: main part – black, middle part – black, end part – blue and adjuster – blue, here on a Yamaha R1.

  • BCF brake lever & clutch lever
    BCF brake lever & clutch lever

    BCF brake lever & clutch lever

    The RAXIMO Lever Guards in the colour combination: add-on part – black, middle part – red and end part – black, here on a BMW F900XR.

  • 6561 Colour combinations
    6561 Colour combinations

    6561 Colour combinations

    With our BCF brake and clutch levers, you can choose the main, middle and end parts as well as the adjuster from nine colours each. This gives you a total of 6561 possible colour combinations.

    The adapter/attachment part is always black.

    This makes every bike unique!

  • BCS brake lever & clutch lever
    BCS brake lever & clutch lever

    BCS brake lever & clutch lever

    The RAXIMO BCS brake and clutch levers in the colour combination: lever part – titanium and adjuster – green, here on a Kawasaki Z900.

  • 81 Colour combinations
    81 Colour combinations

    81 Colour combinations

    With our BCS brake and clutch levers, you can choose the lever part and the adjuster from nine colours each. This gives you a total of 81 possible colour combinations.

    The adapter/attachment part is always black.

    This makes every bike unique!

  • BCE brake lever & clutch lever
    BCE brake lever & clutch lever

    BCE brake lever & clutch lever

    The RAXIMO BCE brake and clutch levers in the colour combination: main part – blue, end part – black and adjuster – gold, here on a BMW R1250R.

  • BCE brake lever & clutch lever
    BCE brake lever & clutch lever

    BCE brake lever & clutch lever

    The RAXIMO BCE brake and clutch levers in the colour combination: main part – gold, end part – black and adjuster – black, here on a BMW R1250R.

  • 729 Colour combinations
    729 Colour combinations

    729 Colour combinations

    With our BCE brake and clutch levers, you can choose the main and end parts as well as the adjuster from nine colours each. This gives you a total of 729 possible colour combinations.

    The adapter/attachment part is always black.

    This makes every bike unique!

Q&A on

RAXIMO levers

The highlights of this new generation of motorbike brake and clutch levers:

  • High-strength aluminium as used in aircraft construction.
  • Milled from the solid.
  • 6-way adjustable.
  • BCF and BCE levers are adjustable in length by 35 mm by means of a dovetail joint.
  • Depending on the model, the fully extended position corresponds to the original length.
  • The anodising of RAXIMO levers meets the highest quality standards.
  • The CNC levers are TÜV approved and are therefore registration-free.
  • What to do if something does not fit or work during assembly?

    Simply contact the Raximo customer service. You will find the details on the service card supplied. It is always helpful to send a copy of the vehicle registration document and a picture of the installed lever/fitting so that we can quickly find a solution.

  • I have installed a different brake pump – what then?

    The national type approval is only valid when fitted to original parts of the manufacturer.
    If, for example, you have installed a different brake pump, we must first check which lever is then suitable. In addition, the installation must be approved by the TÜV.

  • Can I return levers that have been produced for me?

    Levers and Lever Guards are not stock items but are produced on your request with the selected colours and adapters. Despite all this and the comparatively expensive production in Germany, we try everything to keep the prices for you at a good level.

    Unfortunately, in the past, in combination with purchase on account, it happened that customers ordered three, four or more sets of the most beautiful colour combinations and then sent back the ones they didn't like. Partially unpacked, attached, scratched and no longer usable.  However, we do not want to pass on this massive loss to all customers. 

    We exclude these articles from revocation due to the enormous effort and according to the applicable law (see revocation) and refer to § 312g para. 2 BGB (German Civil Code)

  • Colour swap after purchase?

    If you do not like a colour afterwards, we can change individual colours within 30 days of receipt. Unfortunately, this is no longer possible at a later date. 

    However, due to production reasons, only the set, not individual levers. 

    For each component that we exchange, we will charge you 14 € and a DHL exchange fee of 4,90 € for the outward and return shipment. You can find the form here.

  • Is individual replacement possible after a fall?

    If you have had a fall or accident, we offer you the reproduction of one side. The costs for this are then exactly half of the set price plus shipping of 3,90 € within Germany or up to max. 12,- € within the EU. We need your original order number or serial number and you will receive an offer which you have to confirm in order to start the production. You will find the form in your customer area.

  • Where can I have a look at the levers before I buy them?

    You can find Raximo lever samples and the original colour palette in every Louis shop and at the RAXIMO partner stores, of which there are more and more and soon there will be a shop near you. 

    You can also order the levers there and in most cases have them fitted. 

RAXIMO Lever Guards

Lever Guards & Bar-end mirrors

To protect the brake and clutch levers from accidental contact with another motorbike, car mirror, other obstacles or simply as a visual highlight.

To the Leverguards in store

Optionally mountable in combination with our RAXIMO handlebar-end mirrors.

To the mirrors in store

  • RAXIMO LEVER GUARDS
    RAXIMO LEVER GUARDS

    RAXIMO LEVER GUARDS

    CNC-milled aluminium, material: T6061 T6.
    Adjustable by up to approx. 17 mm in length and up to approx. 30 mm in angle by means of a dovetail joint.

    Supplied with model-specific mounting adapter and national type approval.

  • RAXIMO Lever Guards
    RAXIMO Lever Guards

    RAXIMO Lever Guards

    The RAXIMO Lever Guards in the colour combination: add-on part – black, middle part – red and end part – black, here on a BMW F900XR.

  • RAXIMO Lever Guards
    RAXIMO Lever Guards

    RAXIMO Lever Guards

    The RAXIMO Lever Guards in the colour combination: add-on part – blue, middle part – blue and end part – silver, here on a Suzuku GSX-R1000.

  • 729 Colour combinations
    729 Colour combinations

    729 Colour combinations

    With our Lever Guards, you can choose from nine colours each for the attachment, middle and end part. This gives you a total of 729 possible colour combinations.

    This makes every bike unique!

  • Bar-end mirror
    Bar-end mirror

    Bar-end mirror

    Mount our Lever Guards optionally with our RAXIMO BEM-V1 bar-end mirrors.

  • RAXIMO Lever Guards
    RAXIMO Lever Guards

    RAXIMO Lever Guards

    The RAXIMO Lever Guards in the colour combination: add-on part – blue, middle part – blue and end part – titanium, here on a Yamaha MT07.

  • RAXIMO Lever Guards
    RAXIMO Lever Guards

    RAXIMO Lever Guards

    The RAXIMO Lever Guards in the colour combination: add-on part – black, middle part – red and end part – black, here on a BMW F900XR.

  • RAXIMO Adapter
    RAXIMO Adapter

    RAXIMO Adapter

    To fit our RAXIMO Lever Guards and handlebar end mirrors, you will need the appropriate adapters for each model. These are automatically supplied with your order.

  • RAXIMO Bar-end mirrors
    RAXIMO Bar-end mirrors

    RAXIMO Bar-end mirrors

    Our "BEM-V1" bar-end mirrors from RAXIMO have an E-number and are therefore registration-free. The mirror arm can be adjusted laterally by up to 4 cm by means of an additional joint. It can be mounted facing upwards or downwards.

  • RAXIMO Bar-end mirrors
    RAXIMO Bar-end mirrors

    RAXIMO Bar-end mirrors

    The scope of delivery includes the model-specific adapters and black end caps. Optionally, the mirrors can also be fitted with coloured end caps in one of 9 colours and RAXIMO Lever Guards.

  • End caps for RAXIMO Bar-end mirrors
    End caps for RAXIMO Bar-end mirrors

    End caps for RAXIMO Bar-end mirrors

    To mount the RAXIMO handlebar end mirrors, you have the choice between end caps in 8 different colours, or leverguards in 729 different colour combinations from nine colours.

  • RAXIMO Bar-end mirrors
    RAXIMO Bar-end mirrors

    RAXIMO Bar-end mirrors

    Our RAXIMO Bar-end mirrors, here with end caps in blue mounted on a Yamaha MT-07.

RAXIMO Riser

RISER

Handlebar risers are used to improve seating comfort on motorbikes. They lead to a more upright sitting position, which can be more relaxing for some riders on longer tours.

To the Risers in store

  • RAXIMO RISER – "CLASSIC"
    RAXIMO RISER – "CLASSIC"

    RAXIMO RISER – "CLASSIC"

    Motorbikes are generally built to one size fits all. A classic handlebar riser increases the support of the handlebar stand and the handlebars "accommodate" the rider in height. The motorbike and the seating position can thus be individually adjusted to the rider.

  • RAXIMO RISER – "OFFSET"
    RAXIMO RISER – "OFFSET"

    RAXIMO RISER – "OFFSET"

    So-called "offset" handlebar risers have an offset in addition to the height, which brings the handlebar closer to the rider not only in height but also in width, or further away from him when mounted upside down, thus allowing even finer tuning than just via the height.

  • RAXIMO RISER – "VARIO"
    RAXIMO RISER – "VARIO"

    RAXIMO RISER – "VARIO"

    With the Raximo handlebar riser "Vario" we offer you the settings in height and offset even variable, because here by the freely selectable angle distance and height are defined. A setting further away or closer to you is no problem, because "Vario" uses the 2-axis principle to give you the greatest possible adjustment options here.

  • Our risers in comparison
    Our risers in comparison

    Our risers in comparison

    New in our range: our RAXIMO RISER - TÜV approved!

    Available in black, as well as silver and depending on the model in the versions "CLASSIC", "OFFSET" and "VARIO".

  • RAXIMO Riser – "CLASSIC"
    RAXIMO Riser – "CLASSIC"

    RAXIMO Riser – "CLASSIC"

    The RAXIMO "CLASSIC" Riser in silver, here on a BMW F900XR.

  • RAXIMO Riser – "CLASSIC"
    RAXIMO Riser – "CLASSIC"

    RAXIMO Riser – "CLASSIC"

    Available in black and silver.

  • RAXIMO Riser – "CLASSIC"
    RAXIMO Riser – "CLASSIC"

    RAXIMO Riser – "CLASSIC"

    TÜV approved for many models and accordingly available for handlebars with diameter of 22.2 mm, 28.6 mm or 32.2 mm and an increase of 20-50 mm.

  • RAXIMO Riser – "CLASSIC – Adapter"
    RAXIMO Riser – "CLASSIC – Adapter"

    RAXIMO Riser – "CLASSIC – Adapter"

    Even a conversion from 22.2 mm to 28.6 mm handlebars is no problem with our risers.

  • RAXIMO RISER – "OFFSET"
    RAXIMO RISER – "OFFSET"

    RAXIMO RISER – "OFFSET"

    The RAXIMO "OFFSET" Riser in silver, here on a BMW F900XR.

  • RAXIMO RISER – "OFFSET"
    RAXIMO RISER – "OFFSET"

    RAXIMO RISER – "OFFSET"

    The RAXIMO "OFFSET" Riser in silver, here on a BMW F900XR.

  • RAXIMO RISER – "OFFSET"
    RAXIMO RISER – "OFFSET"

    RAXIMO RISER – "OFFSET"

    Available in black and silver.

  • RAXIMO RISER – "OFFSET"
    RAXIMO RISER – "OFFSET"

    RAXIMO RISER – "OFFSET"

    TÜV approved for many models and with a height of 30 mm and an offset of 20 mm accordingly available for handlebar diameter 22.2 mm as well as 28.6 mm.

  • RAXIMO RISER – "VARIO"
    RAXIMO RISER – "VARIO"

    RAXIMO RISER – "VARIO"

    The RAXIMO "VARIO" Riser in black, here on a KTM Duke 790.

  • RAXIMO RISER – "VARIO"
    RAXIMO RISER – "VARIO"

    RAXIMO RISER – "VARIO"

    Continuously adjustable, here in combination with the RAXIMO aluminum handlebar "NEW GENERATION" in red.

  • RAXIMO RISER – "VARIO"
    RAXIMO RISER – "VARIO"

    RAXIMO RISER – "VARIO"

    Available in black and silver.

  • RAXIMO RISER – "VARIO"
    RAXIMO RISER – "VARIO"

    RAXIMO RISER – "VARIO"

    TÜV approved for many models and with a height of 55 mm accordingly available for handlebar diameter 22.2 mm, 25.4 mm and 28.6 mm and for handlebar diameter 32.2 mm with a height of 60 mm.

RAXIMO Handlebar

Alloy Handlebar

Raximo manufactures for you handlebars made of high quality aluminum alloy, which guarantees an excellent combination of hardness and flexibility. The design in three sizes and different angles and offsets covers many motorcycle models. In addition, we offer you the three types of handlebars in 8 attractive colors through high quality anodizing that makes the handlebars not only look very good, but also protects them from corrosion.

To the handlebar in store

  • Handlebar – Raximo "STREET"
    Handlebar – Raximo "STREET"

    Handlebar – Raximo "STREET"

    in eight available colors replaces with style and a great geometry the steel handlebars on many models.
    With a length of 730 mm, the handlebar is suitable for many motorcycles and with the National Type Approval registration-free! For many other models it is registrable.
    Steering tube diameter: 22 mm
    Width: 730 mm, height: 90 mm, offset: 70 mm, maximum outer distance Riser: 120 mm

  • Handlebar – RAXIMO "TOUR"
    Handlebar – RAXIMO "TOUR"

    Handlebar – RAXIMO "TOUR"

    The handlebar, which provides a width of 810 mm and a pleasant offset of 83 mm on many tours for a relaxed ride. Choose one of eight available colors and design your bike to your taste.
    Steering tube diameter: 22 mm
    Width: 810 mm, height: 95 mm, offset: 83 mm, maximum outer distance Riser: 160 mm

  • Handlebar – RAXIMO "NEW GENERATION"
    Handlebar – RAXIMO "NEW GENERATION"

    Handlebar – RAXIMO "NEW GENERATION"

    The New Generation handlebar from Raximo is designed for higher torsional stiffness on newer motorcycle models. With thicker material (28 mm Ø) in the area of the clamp and 800 mm projection, it improves the driving experience on many models.
    Steering tube diameter outside: 22 mm, inside: 28.5 mm
    Width: 800 mm, height: 120 mm
    Offset: 75 mm, maximum outer distance riser: 170 mm

  • RAXIMO Handlebars comparison
    RAXIMO Handlebars comparison

    RAXIMO Handlebars comparison

    Here you can find an overview of all dimensions for comparison.

  • Handlebar – RAXIMO "STREET"
    Handlebar – RAXIMO "STREET"

    Handlebar – RAXIMO "STREET"

    Available in the eight original RAXIMO shades.

  • Handlebar – RAXIMO "STREET"
    Handlebar – RAXIMO "STREET"

    Handlebar – RAXIMO "STREET"

    With the help of the scale, the handlebar can be optimally aligned.

  • Handlebar – RAXIMO "STREET"
    Handlebar – RAXIMO "STREET"

    Handlebar – RAXIMO "STREET"

    The knurled handlebar exterior provides optimum grip for handlebar grips.

  • Handlebar – RAXIMO "STREET"
    Handlebar – RAXIMO "STREET"

    Handlebar – RAXIMO "STREET"

    Here again all dimensions at a glance.

  • Handlebar – RAXIMO "TOUR"
    Handlebar – RAXIMO "TOUR"

    Handlebar – RAXIMO "TOUR"

    Available in the eight original RAXIMO shades.

  • Handlebar – RAXIMO "TOUR"
    Handlebar – RAXIMO "TOUR"

    Handlebar – RAXIMO "TOUR"

    With the help of the scale, the handlebar can be optimally aligned.

  • Handlebar – RAXIMO "TOUR"
    Handlebar – RAXIMO "TOUR"

    Handlebar – RAXIMO "TOUR"

    The knurled handlebar outside provides optimum grip for handlebar grips.

  • Handlebar – RAXIMO "TOUR"
    Handlebar – RAXIMO "TOUR"

    Handlebar – RAXIMO "TOUR"

    Here again all dimensions at a glance.

  • Handlebar– RAXIMO "NEW GENERATION"
    Handlebar– RAXIMO "NEW GENERATION"

    Handlebar– RAXIMO "NEW GENERATION"

    Available in the eight original RAXIMO shades.

  • Handlebar– RAXIMO "NEW GENERATION"
    Handlebar– RAXIMO "NEW GENERATION"

    Handlebar– RAXIMO "NEW GENERATION"

    With the help of the scale, the handlebar can be optimally aligned.

  • Lenker – RAXIMO "NEW GENERATION"
    Lenker – RAXIMO "NEW GENERATION"

    Lenker – RAXIMO "NEW GENERATION"

    The knurled handlebar outside provides optimum grip for handlebar grips.

  • Handlebar – RAXIMO "NEW GENERATION"
    Handlebar – RAXIMO "NEW GENERATION"

    Handlebar – RAXIMO "NEW GENERATION"

    Here again all dimensions at a glance.

RAXIMO Handlebar

Alloy Drag Bar

The extra flat Drag Bar handlebar from Raximo is ideal for conversions for choppers, cruisers and naked bikes and gives your motorcycle the individual Drag Star character. Choose one of four available colors and design your bike to your taste.

TO THE DRAGBAR IN STORE

  • RAXIMO - Drag Bar 22 mm
    RAXIMO - Drag Bar 22 mm

    RAXIMO - Drag Bar 22 mm

    Available in four colors, it replaces with style and a great geometry, the steel handlebars on many models.
    With a length of 800 mm, the drag bar is suitable for many motorcycles and due to the National Type Approval registration-free!
    Width: 800 mm, height: 96 mm, outer diameter in the area of the clamp and the handles: 22.2 mm, inner diameter: approx. 12 mm, width at the attachment: approx. 210 mm

  • RAXIMO - Drag Bar 1 Inch
    RAXIMO - Drag Bar 1 Inch

    RAXIMO - Drag Bar 1 Inch

    Available in four colors, it replaces with style and a great geometry, the steel handlebars on many models.
    With a length of 800 mm, the drag bar is suitable for many motorcycles and due to the National Type Approval registration-free!
    Width: 850 mm, height: 99 mm, outer diameter in the area of the clamp: 1 inch/25.4 mm, outer diameter in the area of the grips: 1 inch/25.4 mm, inner diameter: approx. 15 mm, width at the attachment: approx. 220 mm

  • RAXIMO - Drag Bar 28,6 mm
    RAXIMO - Drag Bar 28,6 mm

    RAXIMO - Drag Bar 28,6 mm

    Available in four colors. With its reinforced diameter (28.6 mm Ø) in the area of the clamping and 825 mm width, the driving feel is deutlich verbessertrt. The Drag Bar is suitable for many models and due to the National Type Approval registration free!
    Width: 825 mm, offset to the rear: 100 mm, outer diameter in the area of the clamping: 28.6 mm, outer diameter in the area of the handles: 22.2 mm, inner diameter: approx. 12 mm, width at the attachment: approx. 220 mm

  • RAXIMO Drag Bar in comparison
    RAXIMO Drag Bar in comparison

    RAXIMO Drag Bar in comparison

    Here you can find an overview of all dimensions for comparison.

  • Drag Bar - RAXIMO 22 mm
    Drag Bar - RAXIMO 22 mm

    Drag Bar - RAXIMO 22 mm

    Available in four colors.

  • Drag Bar - RAXIMO 22 mm
    Drag Bar - RAXIMO 22 mm

    Drag Bar - RAXIMO 22 mm

    Scaling for easy alignment on the clamping of the handlebar.

  • Drag Bar - RAXIMO 22 mm
    Drag Bar - RAXIMO 22 mm

    Drag Bar - RAXIMO 22 mm

    Available with or without perforation for internal cable routing. 

  • Drag Bar - RAXIMO 22 mm
    Drag Bar - RAXIMO 22 mm

    Drag Bar - RAXIMO 22 mm

    Here again all dimensions at a glance.

  • Drag Bar - RAXIMO 1 inch
    Drag Bar - RAXIMO 1 inch

    Drag Bar - RAXIMO 1 inch

    Available in four colors.

  • Drag Bar - RAXIMO 1 inch
    Drag Bar - RAXIMO 1 inch

    Drag Bar - RAXIMO 1 inch

    Scaling for easy alignment on the clamping of the handlebar.

  • Drag Bar - RAXIMO 1 inch
    Drag Bar - RAXIMO 1 inch

    Drag Bar - RAXIMO 1 inch

    Available with or without perforation for internal cable routing. 

  • Drag Bar - RAXIMO 1 inch
    Drag Bar - RAXIMO 1 inch

    Drag Bar - RAXIMO 1 inch

    Here again all dimensions at a glance.

  • Drag Bar - RAXIMO conical 28,6 mm
    Drag Bar - RAXIMO conical 28,6 mm

    Drag Bar - RAXIMO conical 28,6 mm

    Available in four colors.

  • Drag Bar - RAXIMO conical 28,6 mm
    Drag Bar - RAXIMO conical 28,6 mm

    Drag Bar - RAXIMO conical 28,6 mm

    Scaling for easy alignment on the clamping of the handlebar.

  • Drag Bar - RAXIMO conical 28,6 mm
    Drag Bar - RAXIMO conical 28,6 mm

    Drag Bar - RAXIMO conical 28,6 mm

    Available with or without perforation for internal cable routing. 

  • Drag Bar - RAXIMO conical 28,6 mm
    Drag Bar - RAXIMO conical 28,6 mm

    Drag Bar - RAXIMO conical 28,6 mm

    Here again all dimensions at a glance.

RAXIMO Accessories

More articles

The offer of RAXIMO main components is constantly supplemented with articles from the accessories area.

Find out, what suits you!

  • RAXIMO aluminum CNC handlebar grips set
    RAXIMO aluminum CNC handlebar grips set

    RAXIMO aluminum CNC handlebar grips set

    Universal fit for all handlebars and handlebar ends with 22 mm outer diameter. 

    Weight: approx. 150 g (pair)
    Total length: approx. 120 mm
    Length large aluminum part: about 38 mm
    Length small aluminum part: about 8 mm
    Length corrugated rubber part: approx. 68mm
    Outer diameter: approx. 35 mm
    Inner diameter: approx. 22 mm (left side) and approx. 25 mm (throttle side)

    Open end, therefore can be combined with all handlebar ends, handlebar end mirrors, lever guards etc.

  • RAXIMO BOBBINS
    RAXIMO BOBBINS

    RAXIMO BOBBINS

    Stand mounts set, aluminum CNC machined and color anodized in nine colors.

    Available in M6, M8, M10x1.5 mm and M10x1.25 mm.

  • Valve caps
    Valve caps

    Valve caps

    Aluminum CNC machined valve caps with seal against pressure loss even at high wheel speeds.

    Weight: 5,5 g/piece
    Width 11 mm, height 12 mm

    Available in 9 anodized colors.

  • Brake fluid reservoir cover
    Brake fluid reservoir cover

    Brake fluid reservoir cover

    For many motorcycle models in the respective matching colors available. 
    Suitable components can be displayed via the model selection in our store.

Raximo Stores near you

In the more than 80 LOUIS stores in Europe you will find samples of Raximo levers and lever guards and our color palette of nine colors for comparison. There you can also order levers and lever guards directly and pick them up after a few days in the store. 

In the Raximo stores (other icon in the map), of which there is a constantly growing number, you will find not only the Raximo range but you can also have the parts mounted there in most cases. 

We use our own or third party cookies to improve your web browsing experience. If you continue to browse we consider that you accept their use.

Accept